Multicom OTC RFoG Return Path Receiver Module
Key Features
-
Low Noise, high performance for the highest return path capacity and reliability
-
High density chassis design with 2 RPRs per module for up to 28 RPRs in a 4RU OTC shelf
-
Remote management using SNMP allows easy integration to standard management systems
-
High sensitivity and wide dynamic range for easy deployment of RFoG networks and ONUs
-
0 to 30dB attenuation (software controlled) in 0.2dB steps for optimal performance tuning
-
Low power consumption. 14 Watts per module for low cost ongoing operations
-
Status indicators, RF monitor and hot-swappable design for easy diagnostics & maintenance
-
Combined with a Multicom Optical Transport Chassis allows flexible deployments and consistent operations
-
A perfect match for RFoG applications using Multicom’s High-power EDFAs with internal WDMs
Description
The Multicom OTC Return Path Receiver (RPR) Module is specifically designed to support the low power burst-mode return path transmission operations dictated by the SCTE based RFoG networks.
The OTC RPR Module houses 2 highly sensitive managed optical receivers allowing a single 4RU Multicom Optical Transport Chassis (OTC) to support 28 RFoG network links, minimizing precious headend equipment space.
The OTC RPR Modules are very sensitive, low-noise devices that provide a wide dynamic range and unrivaled NPR performance allowing the reception of a burst mode optical input as low as -27dBm without compromising RF output quality.
When combined with Multicom’s NanoNode/RFoG ONU and EDFA, a robust RFoG network with 64 splits can be deployed allowing the optimization of your fiber investment without resorting to remote hubs or field electronics. With a wavelength width from 1100nm to 1620nm and input sensitivity from -12dBm to -27dBm, the Multicom OTC RPR Module can easily support both HFC and RFoG return path applications.
Applications
• Standard RFoG network deployments
• Long distance HFC return path support
• High split count RFoG networks for MDU and high density applications
• High performance DOCSIS networks with upstream channel bonding
OTC RFoG Return Path Receiver Module PN: MUL-OTC-RPR-RFOG-5-85/5-200
The Multicom OTC RFoG Return Path Receiver Module is a member of the Multicom OTC (Optical Transport Chassis) product family that includes the 14 slot OTC chassis, RFoG and HFC Return Path Receivers modules, 1310nm and 1550nm Transmitters modules, and the EDFA module.
Download the Multicom OTC RFoG Return Path Receiver Flyer and Spec Sheet
This product is used in conjunction with the Multicom NanoNode/RFoG ONU
| See the entire Multicom OTC Series of Products |
| Read More about the Multicom Optical Transport Chassis |
| Read More about the Multicom OTC 1310nm Transmitter Module |
| Read More about the Multicom OTC 1550nm Transmitter Module |
| Read More about the Multicom OTC EDFA Module |
| Read More about the Multicom OTC HFC RPR Module |
Back To The Fiber Optics Main Page
Questions on Fiber Optics? Check out the Multicom Fiber Optic Resource Guide - an industry resource
