Blonder Tongue – SD10E-QAM – 10x SD/AV Encoder-QAM, +60 dBmV, 5.75-864 MHz

The SD10E-QAM has been discontinued. We suggest having a look at the Multicom – MUL-SDENC-IP-C-800 – SD Streaming Encoder or the MUL-HDENC-IP-C-8000 – HD Encoder/Modulator with IP Streaming, as an alternative.
  • Digitizes, encodes, and multiplexes up to ten (10) SD (480i) and NTSC baseband Audio/Video inputs into one digital QAM output
  • Compatible with NTSC analog format, and ITU Annex A and B digital QAM formats
  • Comprehensive GUI-based monitoring and control menu via Web browser
  • Allows preview of all 10 streams via a front-panel ancillary DVI output
  • Provides a front-panel RF test point (at 20 dB below primary QAM output)
  • Provides sub-band QAM output channels T7-T14 (5.75-53.75 MHz)
SKU: SD10E-QAM Categories: , , ,

Description

The SD10E-QAM has been discontinued. We suggest having a look at the Multicom – MUL-SDENC-IP-C-800 – SD Streaming Encoder or the MUL-HDENC-IP-C-8000 – HD Encoder/Modulator with IP Streaming, as an alternative.
SD10E-QAM (SD Encoder – QAM) accepts and auto-detects up to ten (10) inputs in SD (480i) and NTSC baseband Audio/Video formats. The encoder, when applicable, digitizes, and MPEG-2 encodes each into a standard-definition stream (SD-480i), and then multiplexes the resulting ten (10) streams into one (1) output in QAM format in the 5.75-864 MHz range (CATV sub-band) channels T7-T14 and standard channels 2-135). The encoder supports Dolby Digital AC-3 encoding and Closed Captioning.

Additionally, two ancillary output interfaces are available: one (1) in ASI format, and one (1) in DVI format for a real-time and simultaneous preview of all the ten (10) multiplexed streams. A front-panel RF test point allows for monitoring/testing of the QAM output without service interruption. Comprehensive remote monitoring and control are accomplished using any standard Web browser via a front-panel 10/100BaseT Ethernet connection.

Open Spec Sheet