Multicom – MLT-1 – Multicom Locking Terminator

Buy Online Now
  • Security Locking Terminator
  • Brass alloy components for superior mechanical strength
  • O-ring between internal components to stop water migration
  • Unique weatherproof design – Design prevents water migration into the terminator even when rear port is left exposed to the environment
  • Compatible with existing tools


Multicom’s Theft Deterrent Locking Terminators are designed to provide optimal performance in typical field installations. They provide a weather-resistant, high performance termination when installed in less than optimal environments.

Locking Terminator Installation Instructions

1. Verify that the terminator pin (center conductor) is straight and centered.

2. Pull tool Actuator back toward the handle (Multicom LTL-7 or compatible). Insert the Tool into the Terminator. Release the Actuator. While holding the terminator, rotate the tool. A snap will be heard which is the tool engaging the internal drive slots of the terminator. [Fig. 1]


3. Install the terminator onto the port and tighten by rotating the tool clockwise. [Fig. 2] locking-term2

4. Pull tool actuator back toward the handle and remove the tool from the terminator. [Fig. 3] locking-term3

To remove the Locking Terminator, reverse these steps.

Open Spec Sheet

Open Ficha Tecnica