Multicom – MUL-VFL-xMW – Visual Fault Locator – 1, 10, 20, 30 & 50mW

  • Bright red laser at 650nm
  • Continuous Wave (CW)/Off/Pulse operation
  • 1, 10, 20, 30 and 50mW Output Power levels
  • 50 hours of operation (typical)
  • Standard AA alkaline batteries
  • Rugged and weatherproof
  • 2.5 mm universal connector
  • Includes carrying pouch with
    belt loop
Buy Online Now




The 1, 10, 20, 30 & 50 mW versions of the Multicom MUL-VFL is the easiest way to identify fibers from end to end and locate polished connector endfaces. The red laser shines through most yellow-jacketed fibers to help you precisely identify breaks, bends, faulty connectors, splices and other causes of signal loss. Reaching up to 5 km*, the MUL-VFL locates faults visually by creating a bright red glow at the exact location of the fault on both Singlemode or Multi-mode fibers.

Output Power Levels
The MUL-VFL-xMW comes in 1, 10, 20, 30, and 50mW Output Power levels

Robust Design
Due to its small size and durable yet lightweight design, this handy tool can accompany you to the most demanding environments. To ensure ruggedness, it features rubber seals, a fully enclosed laser head, and a long-lasting Continuous Wave (CW)/Off/Pulse switch.

High efficiency guarantees long operation with two standard AA alkaline batteries, providing up to 50 hours of uninterrupted operation. Multicompriced to accommodate the tightest budgets, the MUL-VFL-xMW is a truly affordable way to locate faults in OTDR dead zones, field-installable connectors and other applications.

Additional information


Output Power

1, 10, 20, 30, 50

Open Spec Sheet